Smoothflow PWM Twin Track Controller : Build it yourself : Complete kit of Parts. Plugtop power supply included. Soldering Required

PWM Twin Track Controller : Build it yourself : Complete kit of Parts
(Loco is Not included!)
The Smoothflow TTC (twin track controller). Complete Kit
everything you need to build a two track 1.5 amp PWM controller.
Red and green LEDs, and rotary reversing knobs, all included.

Protected outputs, non-feedback.
Iin a stylish slim grey plastic case (Also available separately) with plenty of room to mount the modules and other components.

You need to drill about 14 holes and do a little soldering.
Instruction to guide with the technical bits, bit you can use your own creativity and you need some common sense.

All you see in the photographs- Just not assembled.

1X Plastic case, about 170 X 130 X 55mm. Feet included
2 X Smoothflow PWM speed controller modules.
2 X Rotary switches for direction control (Polarity reversal)
2 X speed control knobs (approx 25mm diameter)
2 X reversing switch knobs (approx 20mm diameter)
1 x Red LED (pre-wired, panel mounting 12v)
2 X Green LEDs (pre-wired panel mounting) 12v
4 X bolts, nuts and washers with solder tags
4 X knurled nuts
2 X 4mm sockets with solder tags (Either for power-in from your supply) or power out if wired across the :
1 X 5.5 mm panel mounting power socket, to suit the :
1 X wall mounted power supply, 12v 1.5A
2 X Thermistors. Extra output protection ( 2 pairs now supplied)
1 X Turret board on which to mount the thermistors.
Pre-printed front and rear face, not unlike the ones in the pictures.
The front face is laminated, the rear panel is not.
Wire for internal connections.

All part are guaranteed. Quickly despatched. Usually delivered in 48 hours.
If anything is unclear, please ask for clarification.
This Controller kit includes a 12v 1.5a plug top power supply